• Single compressor high efficiency surface treatment dedicated air cooled box type chiller
  • Single compressor high efficiency surface treatment dedicated air cooled box type chiller
  • Single compressor high efficiency surface treatment dedicated air cooled box type chiller
  • Single compressor high efficiency surface treatment dedicated air cooled box type chiller
  • Single compressor high efficiency surface treatment dedicated air cooled box type chiller
  • Single compressor high efficiency surface treatment dedicated air cooled box type chiller
  • Single compressor high efficiency surface treatment dedicated air cooled box type chiller
  • Single compressor high efficiency surface treatment dedicated air cooled box type chiller
Single compressor high efficiency surface treatment dedicated air cooled box type chiller

Single compressor high efficiency surface treatment dedicated air cooled box type chiller

 

Features
External rotor type axial fans, equipped with three phase direct drive motors, low noise 8 poles, protection level IP54, provided with a protective outlet grille. Evaporator built with high efficiency shell and tube type heat exchanger, factory insulated with flexible close cell material.



Single compressor high efficiency surface treatment dedicated air cooled box type chiller


Surface treatment water-cooled water chiller

Model

HTB-12SB

HTB-20SB

HTB-25SB

HTB-31SB

HTB-42SB

HTB-48SB

HTB-49SB

HTB-63SB

HTB-94SBHTB-126SB

Cooling

Capacity

KW

12.2

20

24.5

31.4

42

48

49

62.8

94.2125.6

Kcal/Hr

10492

17200

21070

27004

36120

41280

42140

54008

81012108016

RT

3.47

5.69

6.97

8.93

11.94

13.65

13.93 

17.86

26.7835.71

Power 

50HZ

3P-380V-50HZ



Comprosser

Mode

Full closed high efficiency flexible scroll compressor

Input 

power

(KW)

2.13.523.855.16.757.757.710.215.320.4

Rated 

load 

current(A)

46.9710.112.914.21420.230.340.4

Wiring 

specification

446661010162535
Add unloading way0,100%0,50%,100%

0,33%,66%,

100%

0,25%,50%,

75%,100%

CondensorCooling fan(KW)0.20.18×20.24×20.3×20.6×20.6×20.78×20.78×20.78×30.85×3
Structure formEfficient internal thread copper pipe hydrophilic aluminium fin+Auxiliary water spray falling film technology
Evaporater

Freeze water temp

(℃)

Inlet temp 12℃/outlet temp 7℃

Freeze water flow

(m³/h)

1.242.323.564.825.426.887.129.6314.4519.26

Waterpipe diameter

(DN)

32324040404040506580
SafeguardOverload protection,overpressure,inverse phase,open phase protection,exhaust temperature protection,abnormal refrigerant protection,water pump chain protection, etc.
SizeL(mm)9601200125014001400170017001700
26002800
W(mm)70065090090090010001000100011001200
H(mm)1120125017201750175019001900192019501980
Units WeightKg190220280300320350420540610690

Note:

1. Above cooling capacity parameters are all based on the conditions of  dry bulb temperature 35℃, water temperature (in) 12℃,water temperature(out)7℃

2. 2、Above is my company's industrial water-cooled water chiller parameters,evaporator is shell and tube type,if there is a demand for the built-in bank、non-standard products of water pump,can be designed and manufactured according to the concrete situation.

3、In order to ensure technology constantly updated, the above parameters are subject to change without prior notice

4、The specific parameters for non-standard products,welcome consulting our technical department.


Product description

The series Air chiller used the Bitzer screw compressor from Germany, with its own superiority: high energy efficiency, low noise, high 

reliability, small footprint, easy installation, simple operation and high flexibility. It is widely used in surface engineering, medicine, chemical 

industry, metallurgy, leather, laser, electronics, plastic injection molding, printing and other industries. The series water chillers have too 

many models. It can achieve a perfect match for industrial applications.

Foreign-customers.jpg


Features

1. Scroll compressor for modle 12-180kw, semi-hermetic screw compressor for modle 130-2300kw. Each compressor is equipped with a crankcase heater and a thermal overload cut-out; the screw compressor is also complete with a built-in electronic protection with temperature sensor located directly in the motor winding and on the discharge line.

 2. External rotor type axial fans, equipped with three phase direct drive motors, low noise 8 poles, protection level IP54, provided with a protective outlet grille.

Evaporator built with high efficiency shell and tube type heat exchanger, factory insulated with flexible close cell material.

 3. Condenser built with seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins.

 4. Refrigerant circuit complete with charge valves, filter drier, sight glass, gas-liquid separator, thermostatic expansion valve, high & low pressure switch. The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.

 5. Hydraulic circuit built with galvanized pipe, complete with water discharge connection for shell and tube heat exchanger and flange type hydraulic connectors.

 6. Electric panel consist of: Compressor contactor, fan motor contactor, compressor isolating switch, fan protection breaker, phase sequence relay and microprocessor with function display.

 7. Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.


Safety system

1  Compressor reverse protective 

2  Freeze protector protective 

3  Refrigerant safety valve 

4  Buzzer

5  High-pressure gauge and Low-pressure gauge 

6  Power phase failure protector 

7  Coil over-heat protector 

8  Temperature auto-switch 

9  Refrigerant shortage protective


Product Details

HUAZHAO REFRIGERATION set uses the high quality product, don't ignore every detail, to meet the requirements of product you need.

Surface-treatment-industrial-chiller-system.jpg


Working process .jpg


Transport process 

From design to assembly and then ship the unit, every step we require our workers to control the quality strictly, so that each unit can be delivered perfectly.

Packaging.jpg

Customer visit

The arrival of customers is the greatest trust and support for our, our superior professional full service has won customers’ unanimous recognition, every time your visit makes a solid mark in the process of opening up overseas markets

success case.jpg


Product certification

HUAZHAO REFRIGERATION many years decades trials and hardships, we strive and sweat to get a variety of industry certification, authorization..

certificate.jpg


company.jpg


Our Services

24 hours online service

Enquiry will be replied within 1 hours


Our Advantages

1. High quality and professional manufacturer

2. Advanced equipments for manufacturing and testing 

3. Short delivery time 

4. Good after-sale service


FAQ

1.What's the cooling capacity of chillers?

Cooling capacity from 12kw to 2200kw, model choice based on customer actual working condition request

2.What's the delivery time?

Delivery about 15-30 days after deposit confirmed.

3.What's your payment term?

a.We accept 30% T/T as the deposit, the balance payment paid before delivery

b. L/C at sight

4.What’s the voltage of your chiller?

Voltage is 380V,400V,415V,460V/480V just as your request.

5.What is your warranty period?

  One year

But based on some special project, we can extended our warranty period.

Inquiry
Subject:
Your Name *
Product:
Your Email: *
Phone: *
Country: *
Installation City: *
Comment: *
×

We will reply you soon,Thanks!

Subject:
Your Name
Product:
Your Email:
Phone: *
Country:
Installation City:
Comment:

Tel:0086-15262310939

skype

skype:adalee2009

QQ:1249841970

whatsapp:0086-15262310939