• water cooled scroll chiller
  • water cooled scroll chiller
  • water cooled scroll chiller
  • water cooled scroll chiller
  • water cooled scroll chiller
  • water cooled scroll chiller
  • water cooled scroll chiller
  • water cooled scroll chiller
water cooled scroll chiller

water cooled scroll chiller

 

Features
Hydraulic circuit built with galvanized pipe, complete with water discharge connection for shell and tube heat exchanger and flange type hydraulic connectors. Electric panel consist of: Compressor contactor, fan motor contactor, compressor isolating switch, fan protection breaker, phase sequence relay and microprocessor with function display. Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.



230KW R22 refrigerant water cooled scroll chiller


Water cooled  box type industrial chiller

Model

HTB-9S

HTB-15S

HTB-23S

HTB-30S

HTB-35S

HTB-45S

HTB-46S

HTB-60S

HTB-90SHTB-120S

Cooling

KW

8.5

15

23.2

30.1

35

45

46.4

60.2

90.3
120.4

Capacity

Kcal/Hr

7310

12900

19952

25886

30100

38700

39904

51772

77658103544

RT

2.42

4.26

6.6

8.56

9.95

12.79

13.19

17.12

25.6834.23

Power 

50HZ

3P-380V-50HZ

Comprosser

Mode

Full closed high efficiency flexible scroll compressor

Input power(KW)

1.97

3.45

4.94

6.5

7.4

10

9.88 

13

19.526

Rated load current(A)

3.9

8.2

9.8

12.6

13.7

21

19.6

25.2

37.850.4
Wiring specification4466
61010162525
Add unloading way0,100%0,50%,100%

0,33%,66%,

100%

0,25%,50%,

75%,100%

CondensorCooling water temp(℃)Inlet temp 30℃/outlet temp 35℃

Cooling water flow(m³/h)

1.833.234.996.477.539.689.9812.9419.4125.89

Waterpipe diameter

(DN)

323240404050505065
80
Evaporater

Freeze water temp

(℃)

Inlet temp 12℃/outlet temp 7℃

Freeze water flow

(m³/h)

1.462.583.995.186.027.747.9810.3515.5320.71

Waterpipe diameter

(DN)

32323240405050506580
Safeguard

Water pump protection chain,electric leakage protection,overload protection,overpressure,the power reverse phase,open phase protection,abnormal refrigerant protection,exhaust temperature protection,Lack of water protection,etc.

Units WeightKg210240300320340370440560630720
Size

L(mm)

980121012501250140014001500164019002500
W(mm)650650700700700700700700850800
H(mm)210240300320340370440560630720

Note: 

1.Above parameters refrigerating capacity based on the condensation temperature 40℃, evaporation temperature 2℃.

2.Above is my company's industrial water-cooled water chiller parameters,evaporator is shell and tube type,if there is a demand for the built-in bank.non-standard products of water pump,can be designed and manufactured according to the concrete situation.

3.In order to ensure technology constantly updated, the above parameters are subject to change without prior notice

4.The specific parameters for non-standard products,welcome consulting our technical department.


Product description

The series Air chiller used the Bitzer screw compressor from Germany, with its own superiority: high energy efficiency, low noise, high 

reliability, small footprint, easy installation, simple operation and high flexibility. It is widely used in surface engineering, medicine, chemical 

industry, metallurgy, leather, laser, electronics, plastic injection molding, printing and other industries. The series water chillers have too 

many models. It can achieve a perfect match for industrial applications.

Foreign-customers.jpg


Features

  1. Scroll compressor for modle 12-180kw, semi-hermetic screw compressor for modle 130-2300kw. Each compressor is equipped with a crankcase heater and a thermal overload cut-out; the screw compressor is also complete with a built-in electronic protection with temperature sensor located directly in the motor winding and on the discharge line.

 2. External rotor type axial fans, equipped with three phase direct drive motors, low noise 8 poles, protection level IP54, provided with a protective outlet grille.

Evaporator built with high efficiency shell and tube type heat exchanger, factory insulated with flexible close cell material.

 3. Condenser built with seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins.

 4. Refrigerant circuit complete with charge valves, filter drier, sight glass, gas-liquid separator, thermostatic expansion valve, high & low pressure switch. The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.

 5. Hydraulic circuit built with galvanized pipe, complete with water discharge connection for shell and tube heat exchanger and flange type hydraulic connectors.

 6. Electric panel consist of: Compressor contactor, fan motor contactor, compressor isolating switch, fan protection breaker, phase sequence relay and microprocessor with function display.

 7. Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.


Safety system

1  Compressor reverse protective 

2  Freeze protector protective 

3  Refrigerant safety valve 

4  Buzzer

5  High-pressure gauge and Low-pressure gauge 

6  Power phase failure protector 

7  Coil over-heat protector 

8  Temperature auto-switch 

9  Refrigerant shortage protective


Product Details

HUAZHAO REFRIGERATION set uses the high quality product, don't ignore every detail, to meet the requirements of product you need.

water cooled scroll chiller.jpg


Working process .jpg


Transport process 

From design to assembly and then ship the unit, every step we require our workers to control the quality strictly, so that each unit can be delivered perfectly.

Packaging.jpg

Customer visit

The arrival of customers is the greatest trust and support for our, our superior professional full service has won customers’ unanimous recognition, every time your visit makes a solid mark in the process of opening up overseas markets

success case.jpg


Product certification

HUAZHAO REFRIGERATION many years decades trials and hardships, we strive and sweat to get a variety of industry certification, authorization..

certificate.jpg


company.jpg


Our Services

24 hours online service

Enquiry will be replied within 1 hours


Our Advantages

1. High quality and professional manufacturer

2. Advanced equipments for manufacturing and testing 

3. Short delivery time 

4. Good after-sale service


FAQ

1.What's the cooling capacity of chillers?

Cooling capacity from 12kw to 2200kw, model choice based on customer actual working condition request

2.What's the delivery time?

Delivery about 15-30 days after deposit confirmed.

3.What's your payment term?

a.We accept 30% T/T as the deposit, the balance payment paid before delivery

b. L/C at sight

4.What’s the voltage of your chiller?

Voltage is 380V,400V,415V,460V/480V just as your request.

5.What is your warranty period?

  One year

But based on some special project, we can extended our warranty period.



Inquiry
Subject:
Your Name *
Product:
Your Email: *
Phone: *
Country: *
Installation City: *
Comment: *
×

We will reply you soon,Thanks!

Subject:
Your Name
Product:
Your Email:
Phone: *
Country:
Installation City:
Comment:

Tel:0086-15262310939

skype

skype:adalee2009

QQ:1249841970

whatsapp:0086-15262310939